Could be possible heat the two hotends+heatbed at the same time with Materialise?
I can edit the gcode file and remove M109 G-Code, but could be fine if exists any automatic solution.
That is a good question. In my case, the feedback about the temperature seems to be very slow, or to send the new heat only when it reached the requested heat, any suggestion?
The way that the bed and hot ends are turned on with the Materialise software is as follows:
1. Everything shuts down and first the bed heats up;
2. Next up the hot ends. This is how it is set up.
I would suggest not altering this and let the printer work as it should.
What you can do to shorten the waiting period when you are printing PLA is to set the temperature of the hot ends to 220 and the bed at 40 degrees. That way when you preheat the bed and hot ends they will reach the needed temperature and once you load the gcode it will not need so much time to start printing.
When you are printing ABS I am afraid you will have to wait.
Thank you Mircea.
Now I edit the GCode and I delete the M109 instruction because the hotend heat more fast than the bed. It is a "cheat", but it's work!
Thank you for updating the thread in case other people would like to try this.
Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.
Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.
Price Change Policy
If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.
Estimated Delivery Time
Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.
Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.
Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.
In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.