Start a new topic

Unstable temperature

 Hello everybody,


The nozzle temperature is really unstable. It swings between its set temperature and way lower temperatures, as is shown in the picture. It seems like I can only print without clogging the nozzle due to too low temperatures if I set the nozzle temperature at 225. Has anybody experienced this as well? I tried to alter the PID settings already following one of the manuals on the website but that did not help. Also, in a support ticket it was told that I should update the firmware but it gets stuck during uploading every time. I hope somebody can give me some remarks on this as well as the customer service is not really helpful at this point.



Regards,


Marcel

jpg

I'm having the same issue i want to make change to the firmware but every time i try to upload the sketch it gives me a time out error.

Have you tried updating the software and firmware so you have the latest PID settings as well?

1. Update Creatr HS/ HS XL/ HS Lite Stand-Alone Software


2. Flash New Firmware on the Creatr HS/HS XL/ HS Lite


3. Set extruder offset for your CreatrHS (M50)


If this does not work it could either be the thermistor which is not working properly or a damaged heat cartridge. What I would suggest is swapping the left and right hot end and heat cartridge and see is the issue moves to the left side or not.

In the end, I increased the D of the PID to a very high value and that worked.
Login or Signup to post a comment

Standard Shipping Procedures

Global Shipping Chart

Delivery times Leapfrog

Damaged Shipment Procedures

Order Terms & Conditions

Terms and Conditions

Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.

Price Policy

Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.

Price Change Policy

If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.

Shipping

Estimated Delivery Time

Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.

Shipping Costs

Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.

Returns and Exchanges

Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.

Backordered and Drop-shipped Items

Backorder

In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.

Order Return & Exchange Conditions

Order Video Library