Start a new topic

Auto Bed Levelling / Auto Tram/Tramming Correction

Hi All,

While this is not necessarily always a 'big' problem for me it is something that I'd rather not have to do.

That is levelling the bed.....

Has anyone (Leapfrog included) a solution to this, meaning a method to retrofit some peripheral to automatically level the bed?

I know this has been moded to resolve this issue for other printer so what about the Leapfrog Creatr HS?

I believe it is available on the Leapfrog Xeed printer but at another 5K Euro I think is not (for me speaking personally) value for money giving that I can see the technology to implement this is not so sophisticated and have seen several articles showing how this is done for other printers.

Does anyone have experience or more ideas on this?

I do suspect that if this were done to your printer without direct instruction you may well void any warranty so check first...

Thanks in advance for any help or suggestions.

Kind regards


The new software update for the Creatr HS has a display option that makes leveling the bed a bit easier, however it is not yet fully automatic. If you haven't downloaded the new display software update for the Creatr HS, check out: Latest updates for Creatr HS

Hi Aaron,

Would you please fix the link, I get this error msg when using it?




My apologizes, David. Hmm.... I seem to be able to open it (viewing it from Customer view, and not our Technical Support view). The page may have been down for maintenance when you tried it.

If it's still not coming up for you, it maybe possible that you can access it the long way by going to Our website home page -, clicking on the support tab at the top, and choosing "Customer Support Center." Then you can search for the solution entitled "Latest updates for Creatr HS."

However, if it's the 2.1.1 software update that you're looking for, I've attached it to my post to save you the trouble. - Sorry for the inconvenience.



And of course the moment I hit send on my previous post, our tech team receives a memo about this same topic asking us to get the word out to all our clients about the update. 

Please read this blog update from one of our software programmers: Blog: Stand Alone Software and Firmware Updates

After, updating the Stand-Alone Software and the Firmware, please note that under-extrusion might start occuring in your PLA prints unless you adjust your Extrusion Multiplyer Setting in Simplify 3D's print settings to a value of 1 (if it's not already set).

Many thanks!

-Aaron C. - Leapfrog Technical Support Team

1 person likes this

Hi Aaron,

Many thanks for the link to the interesting article and detailed description on how to perform this update. This is of great interest to me and many other Leapfrog user I expect.

However sadly (and I have posted yet another ticket to Leapfrog Tech Support) that for some unknown reason my printer will not recognise the .HEX file format but only looks for a .gcode or .JAR file...... REALLY REALLY annoying and frustrating as I've never been able to get my printer to perform reliably :-( so I am no longer and far from being a happy customer anymore :-(

But many thanks for the effort and support to try and resolve my problem.



Login or Signup to post a comment

Standard Shipping Procedures

Global Shipping Chart

Delivery times Leapfrog

Damaged Shipment Procedures

Order Terms & Conditions

Terms and Conditions

Placing orders on implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.

Price Policy

Pricing on is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.

Price Change Policy

If an item on is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on There will be no cash refunds as part of the price assurance policy.


Estimated Delivery Time

Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.

Shipping Costs

Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.

Returns and Exchanges

Orders placed on are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.

Backordered and Drop-shipped Items


In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.

Order Return & Exchange Conditions

Order Video Library