Got my HS today - so far so good - a few issues I am working through.
Just started a print from simplify 3D - set it up for right extruder only. (sd card)
Left extruder temp set to 0.
When I started the print both extruders heated up to 220 and the bed heated fine.
Print started and the left extruder then became unheated as it is supposed to.
Actually the left extruder should never have heated up....
funny thing = the left extruder heated up to 220 but the display showed 22/0 meaning it is at 220 but is set to be at 0.
After the print started it cooled off but just seems like a waste of energy and time to heat both if you dont need then and have the left one tuned off properly in the software - which I do since it turns off for the print.
I use simplify on my other printer and have no issues like this.
The extruders are preset from the firmware to heat both of them when you heat the printer without a Gcode. When you upload a Gcode, the printer is reading it and use the settings you made by the Gcode. The printer doesn`t know which extruder you will use before upload the Gcode, for this both extruders are heating.
Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.
Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.
Price Change Policy
If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.
Estimated Delivery Time
Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.
Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.
Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.
In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.