Start a new topic

Creater Dual extruder with Simplafi3d dosn't print (very slow movment)


Can any one help with this problem :

Creater Dual extruder with Simplafi3d dosn't print (very slow movment) 

Thanks Amnon

Can you try printing the attached file? Does the same issue occur? 

Did you ever get this issue fixed? If so what was the answer?

Thanks for sharing!


Hey Amnon,

I am also curious if you have fixed the issue.

I am having the same problem currently in my Creatr Dual Extruder running Simplify3D v2.2.2. My temporary fix is to currently remove the M201 g-code. Under 'Edit Process Settings' --> 'Script' delete the line with M201 code. This seems to be a temporary fix. I have already opened a ticket but it seems that the Support Team thinks it's an endswitch problem...........God knows why. 

Maybe you could try to delete the M201 code and see if it works for you too? Or if you had better luck in figuring the root of the problem?


Joe Trisnadi

Hey Amnon, 

thank you for contacting Leapfrog Support. I have attached a new beta version of the firmware for the Creatr Dual, which should fix the issue. It also adds dual temperature reporting.

By the way, M202, which is in the start up script, is not used in our firmware anymore so can be removed. Actually the M201 can also be removed since those settings are now correct in the firmware.

You can use the standard M500-M503 Marlin commandos to check the EEPROM and memory settings:

// M500 - stores paramters in EEPROM

// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).

// M502 - reverts to the default "factory settings", hardcoded in the firmware. You still need to store them in EEPROM afterwards if you want to.

// M503 - print the current settings (from memory not from eeprom)

Please use the Classic Arduino to upload:

1.0.6: Windows Installer

Make sure you add the correct extruder offset in Configuration.h before uploading, which often can be found on a sticker on the bottom of the printer.

Let me know if this resolves the issue.

Kind regards,

Pim Rutgers

Software Engineer



not sure where the problem comes from but maybe check here:

(show advanced setting of a material)

the overall speed may be set too low? ->other -> speeds

also you have a cooling setting that slows down the speed for small objects but this should not affect travelling when not printing. ->cooling ->speed overrides

maybe install new firmware

did fw fix it?

Login or Signup to post a comment

Standard Shipping Procedures

Global Shipping Chart

Delivery times Leapfrog

Damaged Shipment Procedures

Order Terms & Conditions

Terms and Conditions

Placing orders on implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.

Price Policy

Pricing on is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.

Price Change Policy

If an item on is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on There will be no cash refunds as part of the price assurance policy.


Estimated Delivery Time

Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.

Shipping Costs

Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.

Returns and Exchanges

Orders placed on are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.

Backordered and Drop-shipped Items


In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.

Order Return & Exchange Conditions

Order Video Library