i currently have some issues with my Creatr HS, because the temperature of the extruder varies very much.
E.g. i have set the temperature to 245°C in Simplify3d then the nozzle has an actual temperature of 220-238°C during the print, i have checked the complete heat block and replaced it (every part). the heat cartridge is perfectly aligned and the heat sensor is screwed in to the end.
Does anyone else have (or had) this issue and how did you solve it ? I think that it's a firmware issue. That might also be the reason, why the printer takes longer then it should to get the extruder to heat up.
Refering to the given example the extruder heats up to ~255°C, falls down to 220°C and makes two more of those "swings" before it stabilizes at ~242°C.
I think that the software just doesnt check the temperature often enough so that it can drop very low between those temperature-checks.
Maybe i just oversee a checkbox in Simplify3d or something like that so please be so kind and send me your print settings for the "temperature"-header in advanced settings from simplify for me to compare them.
I'm thankfull vor every response.
I had the same issue on a creatr HS. Doing THIS solves it, works much better now.
Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.
Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.
Price Change Policy
If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.
Estimated Delivery Time
Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.
Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.
Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.
In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.