I just noticed the 4 screws holding the bed have a handle at the bottom. why not reverse them so the handle is above the bed for easy adjusting ? (OK it might have some play if the bottom is not screwed tight)
of course the stopnut is good to avoid changes due to vibrations.
also I would rather see a double or triple finer screw (M6x0,5 or even M6x0.36) since a 1/8 of a turn of the actual M6 can make all the difference..
just some ideas for the future.
Personally i like them better underneath, the movement is more natural when for example you are trying to calibrate the bed offset in relation to the tip of the nozzle.
On my HS, the play in the threaded part in the platform is to big I think. I basically have to calibrate the bed each time I want to do a print. The vibration from the printer is enough to change the setting during the printing sequence.
The screws need a way finer pitch If you ask me, it's near impossible to get a even bed on my HS. Also on this topic, the glas bed seems uneven, it's circa 0.1-0,2 mm higher in the middle compare to the corners. Either this or worse. the X/Y axis rods are not straight.
I can appreciate to have the underneath, if one do not need to fiddle with them all the time.
yeah, same problem here. don't even touch the handles after calibrating. when you turn the handles it changes the hight (don't think it supposes to do that without turning the bolts)
Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.
Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.
Price Change Policy
If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.
Estimated Delivery Time
Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.
Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.
Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.
In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.