I've starting a print overnight.
This morning i'm discovering this Blob of PLA
what can i do to repair this ?
I have used a lighter to melt all the PLA.
Wires are a little suffered but it's seems ok.
Now i can't manage the temperature of the extrudeur. It's always hotter and hotter, even i turn it off with simplify3D.
The only way to make it stop upping the temp is to turn off the printer with the physical power button is the back of the printer.
If i don't turn it off, the temp up higher than 350°C
What i must check please ?
looks like your extruder ended up with partial clog resulting the filament curling back up on itself and forming the ball
Use some side cutters to break off as much of the plastic as possible and clean off as much of the plastic as possible..
it may just crack off the metal.
Then heat up the extruder get the nozzle off and burn the nozzle clean with a torch or over a gas stove. the plastic will turn to ash and brush off.
Reassemble and everything should work fine again unless you have burned out the thermister which could be why the hot end would not turn off, the board doesn't realize when it has reached the proper temperature.
Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.
Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.
Price Change Policy
If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.
Estimated Delivery Time
Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.
Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.
Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.
In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.