this is my first post on this forum , so , hello everybody !
I have my creatr Dual since 2 days now, and there is something i can't understand.
even i choose PLA or ABS , with medium or High quality , all the face which look down are wrong and noisy and like wavelet.
It's the under red zone of my picture.
I'm using The last release of Simplify 3D
thanks for your kindness
nice one !! Robert, i will try this idea and let you know if it's working netter for me too
Turning off "allow zeroing of extrusion distances (i.e. G92 E0) only effects the leaning problem.
If the layers of plastic don't stick to each other very well, you may want to try increasing the temperature of the extruder a little. Maybe try increasing the extruder with the white plastic to 200°.
Here is one that I designed:
Because i have too much issue with the extruders , i think to change the way the filament is going inside the head.
instead of inside the printer with a long and hard path, i 've put the filament on the top of the printer, near to the head .
It's working now everytime , i can print 10 objects one after one without issues !
My filament roll is on horizontal right now, but i think it could be better to have them vertical, i will try this later.
Is someone having create something to make the path easier for our printer already ?
I'm using Simplify3D 2.1.1
I've done 2 test this night.
the Black PLA at 215°
Primary layer 0,1000 mm
Top solid layer 6
Interior fill 20%
the white at 190°
Primary layer 0,1000 mm
Top solid layer 6
Interior fill 30%
the bed 50°
with "allow zeroing of extrusion distances (i.e. G92 E0). " ON :
i have my object whithout holes now ! i thinks the temperature is the good one ( 215° , but the black is now shinny instead of mat )
But it's stay leaning
with "allow zeroing of extrusion distances (i.e. G92 E0). "
I have only some first layer of white, after i do'nt know what happen, the white is'nt sty stichy, .. it's not working at all .
the filament sticks to the nozzle probably because the temp is too low for the extrusion, please raise the extruder temp by 10 C.
Another possible reason is that the offset in between the tip of the nozzle and the bed is too much. Which software are you using to generate the code with?
Now it's impossible to print anything.
All the PLA is glued to the head of the extrudeur. nothing is on the bed, the Z level seems good !
looks like i need the Gcode G92E0 enabled ... but it's leaning ..
My fisrt layer not staying sticky to the bed without heating it.
I try with 60° but it's not ok, i will try with 70°.
My previous test with 80° make the object too difficult to unstick from the bed after printing .
so, i just keep this parameter at this time
I will start a new print with :
got it, thank you for the photo.
you should consider raising the infill percentage and the number of the top solid layers. maybe a slower printing speed but this last one is optional.
Maybe there are more visible in this picture, i add some red strokes.
I am not sure i can see which holes are you referring too. Could you be more specific please?
Ok, and did you know how to proceed to not have the holes in the black surface ?
Do i need to put my Black extrusion hotter ? slower ? or any other paramater i didn't know at this time ?
The solution Robert was talking about is for solving the leaning issue only.
thanks you, that's a fast answer, i appreciate :)
I will try a new print of this bicolor object without heated bed and with this Gcode checkbox disabled .
I'm back soon to let you know .
Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.
Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.
Price Change Policy
If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.
Estimated Delivery Time
Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.
Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.
Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.
In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.