Start a new topic

How to print correctly filaflex filament with Creatr-repetier?

Hi!

I am trying to print an object with filaflex and pva as support.

I have 2 problems :


- The major : During printing the extrusion of filaflex stops because it loose the alignement(  after one retractation, i guess).

- The minor : When pla is printing, filaflex continue to flow (which is not a problem now because my object is small but will be a problem when i will do a bigger one


I tried 230° and 220° temperature for filaflex. You can find my gcode here

I could print something without support, but not very clean and note complete.


Does someone succeed to do such a print? How?



stl

I succeed in keeping the filaflex  flow working until the end  by keeping the filament in my hand and not directly by tubes.

But the result is not clean at all. this is not a demisphere :s. I will try with others parameters of infill (for now density 0.4 and rectilinear) and let you know

Hi Caroline,

Did you have succeed with the filaflex??

I have tried all temps between 230-260 degrees, and speeds going down to 20 mm/s. I have also tried cooling the filament, but 30 minutes into the print, the filament bunches up and everything comes to a screeching halt. I noted that the bunching occurs when the extruder motor heats up to a certain degree, and the metal parts feeding the filament are almost too hot to touch. Design problem maybe? I've talked to Recreus in Spain, and they say that they do not have an extruder that is compatible, even though it is listed on their site that it is. I've looked at the E3D extruders, and they look like something that would probably work, and better than the stock extruders available. There is a suggestion of drilling out the tube to the hot end to 4 mm, and getting some 4mm OD/ 2mm ID PTFE tubing to retrofit, and wondered if anyone has tried this. The E3D package is 40 pounds and I'm not sure if that is compatible or not. 


I would live to hear any opinions on this, as there are some projects that require flexible material for handles (no, not sex toys), and I need to be able to know one way or the other.


Best Regards,

Eliza

OK--one other thought--the smaller the nozzle size, the higher the back pressure. If the back pressure is part of the problem, going up on the nozzle diameter might be a work-around. I am using a stock 0.35mm nozzle, and it definitely has problems, so perhaps going up on the nozzle diameter might work. Once again I am open to any thoughts on this.

Dear Elizabeth Donavan,


In order to print fila flex on the Creatr Dual printer I would suggest having a look at the link below and see the adaptor a Leapfrog Creatr user developed in order to print ninja flex on his Creatr Dual.


http://www.thingiverse.com/thing:321258


I believe this might help you with printing fila flex.


Login or Signup to post a comment

Standard Shipping Procedures

Global Shipping Chart

Delivery times Leapfrog

Damaged Shipment Procedures

Order Terms & Conditions

Terms and Conditions

Placing orders on Lpfrg.com implies consent to abide by the terms and conditions below as well as the terms in our Return Policy.

Price Policy

Pricing on Lpfrg.com is subject to change without notice. Leapfrog BV reserves the right to correct pricing on items listed incorrectly and to notify the customer prior to shipping of the item of an additional balance due or offer to cancel the order.

Price Change Policy

If an item on Lpfrg.com is purchased and the price is lowered within 10 days, Leapfrog BV will reimburse the difference in cost to the customer as store credit that will apply to future orders. The customer must request this reimbursement within 7 days of the price change on Lpfrg.com. There will be no cash refunds as part of the price assurance policy.

Shipping

Estimated Delivery Time

Leapfrog BV guarantees orders received by 10:00am CET will be processed the same day and delivered within 5 business days of the order unless otherwise specified. Business days will be counted starting on the next business day after the order is received. Business days do not include weekends or holidays.

Shipping Costs

Orders shipped from Leapfrog BV warehouses are typically shipped via ground service, but some packages with unique weights and measures will require LTL freight type shipping which can result in additional shipping charges, that are not remarked on your original invoice.

Returns and Exchanges

Orders placed on Lpfrg.com are considered complete and verified by the customer. There is no guarantee that once an order has been placed that Leapfrog BV will be able to cancel or modify it. If an order needs to be canceled or changed, contact Leapfrog Customer Support immediately by submitting a ticket at support.lpfrg.com. Orders that are already listed as “In Shipping” are not able to be changed or canceled and will be subject to our standard Return Policy.

Backordered and Drop-shipped Items

Backorder

In the event of a backordered item Leapfrog BV will attempt to contact the customer to discuss the issue and options available. Other items on the order will be shipped without delay. If Leapfrog BV is unable to contact the customer about the backordered item, it will be cancelled and the cost of the item refunded to the original payment method. Notification of the cancellation will be sent to the email address listed on the order, provided a valid email address has been given.

Order Return & Exchange Conditions

Order Video Library